Description
This is a hub armor / strain relief mod designed specifically for the Anycubic Kobra X with the ACE Gen 2 hub.
The goal of this model is simple: reduce stress on the PTFE tube connector and improve filament loading reliability.
UPDATE 4/18/26
I added another print profile, multi color. Please print in what would match your setup. For the main body, "Anycubic Light Grey PLA" is the best color I found to match the body.
🔧 Why this exists
On multi-filament systems (similar to mods seen on the Bambu A1), the point where PTFE tubes enter the hub is a high-stress area. Over time, constant bending and movement can lead to:
- Connector wear or failure
- Increased friction during filament loading
- Difficulty feeding flexible filaments
✅ What this model does
- Relieves strain on the hub connector by guiding PTFE tubes smoothly
- Eliminates sharp bends at the filament entry point
- Improves filament path alignment into the hub
- Adds a clean, integrated “armor” look to the setup
🧵 Filament loading improvements
- Makes loading filament noticeably smoother
- TPU-friendly design — tested with 95A TPU, no need to disconnect the PTFE tube
- Reduces snagging and resistance when feeding softer materials
🛠️ Design notes
- Snug fit around the ACE Gen 2 hub
- Designed to keep PTFE tubes aligned and supported
- Minimal footprint, no interference with normal printer operation
🧪 Tested on
- Anycubic Kobra X with ACE Gen 2 hub
- PLA, PETG, and TPU (95A confirmed working without tube removal)
Tags
License

